By now, you’ve measured your space and bought or found the fabric you’ll need.
When I said this project was simple; I meant really simple. First, you’ll need to cut out your rectangles to the measurements you made earlier. Measure twice before cutting. Sometimes I measure twice incorrectly. That is really annoying. So just be careful with your measurements.
The example curtain I am using is from
Captain America fabric that my daughter wanted. The store only had enough for a single curtain, and it was 42 inches wide. So I adjusted my secondary fabric to 42 inches wide as well. I needed to change fabric the pictures of the original fabric were completely blurry and unusable, so I changed to another pattern. A little cutting with the rotary tool, which I highly recommend when cutting rectangles, and I had my cut pieces.
Next, pin your two fabric together right sides together. The order for sewing on this project is probably a bit different than you are used to or will be told to do so in the future. I make sure the top and bottom line up perfectly, or as close to perfectly as possible. I sew the top first using a one-half inch seam allowance. Then, I press the seams open. You definitely want these seams pressed open.
Then, I sew the bottom seam allowance of one-half inch. This can be tricky if there was any error in cutting, sewing, or drape that escaped noticed – this happens, don’t worry about it. Press these seams as well, but they don’t have to be open. Next you will need to measure three-to-four inches down from the top on both sides. You will leave this portion open for the curtain rod. It also is big enough to accommodate a hand for turning and enough room to stitch the seam allowance down with the sewing machine later.
For the next step, you have a few options. First using your sewing machine, you can sew the seam allowance down being careful not the close the gap or stitch what will be the circle for the curtain rod closed; this is what I do. You can also hand stitch your seams down. This will take longer, but has the advantage of being easier. You can use fabric glue to hold the seams in place; the disadvantage is that you can’t hang your curtain up immediately. Last, you could leave it alone and risk fraying later. It is up to you.
Hang your curtain up, and you are done.
Advanced techniques for this curtain would be to sew a straight line from the bottom of the left side gap to the right side gap. This creates a channel. You can also top stitch around the curtain to give it a more finished look.